wall panels (30)

Filter Close
View as
  • Add to wishlist Quick view

    5 SciFi Kitbash Droid Interface Panels

    £24.95 £33.95Price range: £24.95 through £33.95
    A collection of 5 technical control panels, electrical panels or general kitbash greeblies for any Star Wars or SciFi diorama scale model scene. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. As a indicative size, the pieces are around 25mm x 45mm in size or smaller. Each panel has been 3D Printed in quality ABS-like resin. Will require painting but you can choose to have us paint them for you! The unpainted parts will need cleaning and removal of 'flashing'. Information leaflet on Resin Preparation is included in the box. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Full Scale Prop Hyperspace Modulator Control from Galaxy’s Edge

    £175.00 £295.00Price range: £175.00 through £295.00
    Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Hyperspace Modulator Control is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of thirteen randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included) or by a USB-C cable (also not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 4 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the x6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 13x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 13x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Kyber Crystal Illuminated Container

    £42.95
    This rare crystal Kyber shard, a luminescent jewel at the heart of every Jedi's lightsaber in the Star Wars universe, has captivated the imagination of fans and cosplayers alike. This crystal is more than a mere power source; it symbolizes the Force's connection and the Jedi's devotion to their cause. Now, enthusiasts can bring this iconic element to life through our meticulously crafted Illuminated crystal and protective container. These replicas offer an enchanting experience, allowing fans to hold a tangible piece of the Star Wars mythos. The crystal, with its radiant hues, represents the essence of the light or dark side. Placed within a transparent container, it's bathed in a soft, ethereal glow that mirrors its cinematic allure. For cosplayers, these illuminated replicas offer a chance to immerse themselves further into their chosen character's identity. The container's intricate design, mirroring the aesthetics of an ancient artifact, enhances the visual impact of any costume ensemble. Displaying the container alongside a lightsaber prop completes the illusion, transporting fans to a Galaxy Far, Far Away.
    • Comes presented in a special display box and the Crystal Container is approximately 6" tall by 1.5" in diameter
    • The color of the crystal shard may differ in hue from the photo
    • Crystal Container is supplied with x3 LED orbs that will last approximately 24 hours each
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Full Scale Wall mounted Control Panel from Star Wars: Rogue One

    £135.00 £230.00Price range: £135.00 through £230.00
    This full-scale prop has been styled from the Star Wars: Rogue One movie and is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. We have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of 10 randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included) or by a USB-C cable (also not included). The Control Panel can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Unit yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 10x pre-wired and resistored LEDs; x10 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 10x Acrylic colored panels, x1 resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Barricade Wall from Jedi Survivor game

    £15.95 £75.95Price range: £15.95 through £75.95
    A single section of the Barricade as seen in the Star Wars game - Jedi Survivor. You will receive 2 wall panels and a base section that make up a section of trench wall. You can order multiple sections to make a longer wall if you wish. Lovingly re-created, they have been scaled for Star Wars Legion game or your standard 18th (3.75") scale or 12th (6") Bandai or Hoy Toys figures, and make a great addition to your latest diorama scene. Each section has been cast in high quality white or grey resin. Will require assembly and painting. Once assembled, a single section of barricade will stand approximately:
    • 215mm tall by 150mm wide by 14mm deep (18th scale)
    • 315mm tall by 220mm wide by 20mm deep (12th scale)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Full Scale Prop Control Console from Galaxy’s Edge

    £135.00 £230.00Price range: £135.00 through £230.00
    This full-scale prop from Star Wars is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. Seen in Batuu, Galaxy's Edge in Disneyland we have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included). The Control Console can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Console yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, x1 large round resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Full Scale Prop Anode Processor Panel from Galaxy’s Edge

    £175.00 £295.00Price range: £175.00 through £295.00
    Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Anode Processor Unit is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 2 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the 6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Full Scale Prop Amnesty Housing Door Control unit

    £150.00 £230.00Price range: £150.00 through £230.00
    As seen in the Mandalorian TV show Episode 3, Series 3 - this full-scale prop of the Amnesty Housing Door Lock is wall-mounted, and measures approximately 21cm (L) x 11cm (W) x 4.5cm (D) in size. It has been reproduced as closely as possible to the one in the show, and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of seven randomly flashing and pulsing lights that are powered by a 9V Battery (not included). The Door Lock can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a mounting hole for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the 9V battery for when the battery needs to be changed. KIT FORM: If you prefer to assemble the Amnesty Housing Door Lock yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 7x pre-wired and resistored LEDs; x7 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x 9V Battery box; 7x Acrylic colored panels, x2 resin parts, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Amnesty Housing Door Control Panel

    £2.95 £5.95Price range: £2.95 through £5.95
    This detailed Door Panel is reproduced from the Series 3 Episode 3 of Mandalorian TV show showing the Amnesty Housing door control. The panel is available in 3 different sizes for your model diorama.
    • 12th scale - 25mm x 13mm
    • 6th scale - 50mm x 26mm
    • 18th scale - 16mm x 9mm
    Cast in high quality grey resin, it will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    9 Technical Control Panels

    £20.95 £45.95Price range: £20.95 through £45.95
    A collection of 9 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    20 Technical Control Panels

    £27.95 £56.95Price range: £27.95 through £56.95
    A set of 20 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Glowing Sign (Large) with LED panel

    £15.95 £31.95Price range: £15.95 through £31.95
    Ideal for your next Star Wars diorama, this Glowing building signage can be fitted with a LED Micropanel so that the sign is lit from within. The frame comes in two halves, and the LED panel fits inside, and once assembled can be mounted onto the wall of your diorama for atmospheric effects. 2 small pegs connect it to the wall of your building or diorama.
    • Approximately 125mm x 65mm x 30mm
    • Can be supplied with or without the LED Micropanel & resistor
    • Optional signs have been printed in high quality decal paper
    • Printed in grey ABS-like resin
    • Will require painting
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Star Wars Trench Walls

    £20.95 £30.95Price range: £20.95 through £30.95
    A collection of 4 wall panels and 2 base sections that make up a section of trench walling as seen in the Star Wars "Solo" movie. 3 panels are undamaged but one panel has blaster damage. Lovingly re-created by Janne Mällinen they have been scaled for your standard 18th (3.75") scale or 12th (6") Bandai or Hoy Toys figures, and make a great addition to your latest diorama scene. Each section has been cast in high quality white or grey resin. Will require assembly and painting. Once assembled, will stand approximately:
    • 215mm tall by 150mm wide by 14mm deep (18th scale)
    • 315mm tall by 220mm wide by 20mm deep (12th scale)
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Vaporator Monitoring Station

    £14.95 £55.95Price range: £14.95 through £55.95
    This detailed Vaporator monitoring station is perfectly suitable for both 12th scale (6") and 18th scale figures (3.75") but we also sell a 6th scale version for your bigger dioramas! A wall-mounted unit, it makes a perfect accompaniment to your Tatooine diorama. Printed in ABS-like grey resin, the station comes with decals. Will require assembly and painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Bay 94 Sign – 3-pack

    £8.95
    A pack of 3 set of Bay 94 signage wall plaques for your next Millennium Falcon Star Wars diorama. Straight from Tatooine, you get three panels of different sizes can be wall mounted. Comes with a slight surface texture to simulate stonework.
    • 65mm (W) by 56.5mm (W) by 4mm (D)
    • 43mm (W) by 37.5mm (W) by 2.7mm (D)
    • 30mm (W) by 26mm (W) by 2mm (D)
    Each sign has been printed in high quality grey ABS-like resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    Death Star Wall Panel Sets

    £19.95 £55.95Price range: £19.95 through £55.95
    These detailed wall panel sets can be combined to create a number of Imperial Death Star wall panels and are approved by Darth Vader himself. The panel sets can be added to your own custom diorama base to really enhance the final scene. The Panel Sets have been scaled to fit either an 18th or 12th toy or model figure. There are approximately 25 elements in each Panel Set. Each Panel Section covers approximately 180mm x 180mm surface area, and has been cast in high quality white or grey resin. Will require assembly and painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Light Sconces 8-Pack

    £4.95
    This pack of 8 light sconces can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. There are two different designs in the pack (4 of each) and measure approximately 30mm x 9mm. Each panel has been printed in ABS-like grey resin. Will require painting.
    Add to basket
  • Add to wishlist Quick view

    Sci-fi Barrel

    £4.95 £15.95Price range: £4.95 through £15.95
    Enhance your scale model kits or toy Star Wars diorama with this reproduction of a barrel from Galaxy's Edge in Disneyland, Florida. The barrel is printed in high quality 3D ABS-like resin and can be added to your own custom diorama base. Will require painting. Barrel size is approximately 117mm tall by 75mm diameter at 12th scale.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    SciFi Circular Portal Hatch

    £8.95 £9.95Price range: £8.95 through £9.95
    A brilliant addition to your next diorama - the Circular Portal Hatch has a high level of detail for your scale model kits dio. As seen at Batuu, Galaxy's Edge in Disneyland, this portal can either be wall or floor mounted. Comes with a surface texture to simulate rust and is approximately 60mm diameter by 10mm high at 12th scale. Printed in high quality grey ABS-like resin. Will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Sci-fi Light Fixture – Twin Pack

    £2.95 £12.95Price range: £2.95 through £12.95
    A 2-pack set of wall-mounted light fixtures as a valuable addition to your scale model kits or toy Star Wars diorama. As seen at Batuu, Galaxy's Edge in Disneyland, you get two lighting fittings that can be wall mounted - and even drilled and lit - to really enhance your personal diorama scene. Comes with a slight surface texture to simulate rust and is approximately 28mm (W) by 18mm (W) by 15mm (D) at 12th scale. Each light has been printed in high quality grey ABS-like resin. Will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    SciFi Anode Processor

    £10.95 £20.95Price range: £10.95 through £20.95
    To add to your next diorama scene, the Anode Processor has been reproduced from accurate photos and is highly detailed. Printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Anode Processor Unit is typically wall-mounted, and measures approximately 60mm (L) x 40mm (D) x 25mm (H) at 12th scale, and will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    SciFi Twin Displacement Compressor Panels

    £9.95 £11.95Price range: £9.95 through £11.95
    To add to your next diorama scene, these twin Displacement Compressor Units are a set of highly detailed wall panels, and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Twin Compressor Units measures approximately 50mm (L) x 28mm (D) x 10mm (H) at 12th scale, and will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    SciFi Capacitance Generator

    £8.95
    To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures approximately 50mm (L) x 35mm (D) x 10mm (H) at 12th scale, and will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    SciFi Condenser Unit

    £12.95 £29.95Price range: £12.95 through £29.95
    To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures 60mm (L) x 40mm (D) x 15mm (H) at 12th scale, and will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Add to wishlist Quick view

    Death Star Control Panel 3-Pack

    £4.95 £5.95Price range: £4.95 through £5.95
    This 3-pack custom wall control panels as seen on the Death Star in numerous Star Wars movies. The control panels can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. Panels are 15mm by 10mm. Each panel has been cast in high quality white or grey resin. Will require painting.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Sale!
    Add to wishlist Quick view

    8 assorted SciFi Door Control Locks and Panels

    Original price was: £18.95.Current price is: £15.95.
    A collection of 8 custom door lock units and control interface panel tiles based on the universe of Star Wars but could be used in general SciFi dioramas. There are a number of units together with a keypad and electrical switch. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or control interfaces mounted on the wall. Each part has been printed in ABS-like grey resin. Will require painting.
    Add to basket
  • Sale!
    Add to wishlist Quick view

    Galaxy Edge Wall Panels – Pack 2

    Original price was: £14.95.Current price is: £10.95.
    A collection of 9 custom wall units and control interface panel tiles as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. There are a number of wall units together with 2 keypads and wall lights. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.
    • 3 Wall Lights
    • 2 Keypads
    • 3 Main Block power units / panels
    • 1 miscellaneous greeblie
    Add to basket
  • Sale!
    Add to wishlist Quick view

    Galaxy Edge Wall Panels – Pack 1

    Original price was: £13.95.Current price is: £8.95.
    A collection of 7 custom wall panels and units as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. Often known as greeblies, the various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.
    Add to basket
  • Sale!
    Add to wishlist Quick view

    7 SciFi Control Boxes and Vent Panels

    Original price was: £13.95.Current price is: £6.95.
    A collection of 7 custom control panels, vents and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting.
    Add to basket
  • Sale!
    Add to wishlist Quick view

    4 Imperial Wall Section – 1:12

    Original price was: £12.95.Current price is: £6.95.
    A collection of 4 custom wall tiles for a Star Wars Imperial diorama approved by Darth Vader himself in 1:12 scale to use as a valuable addition to your scale model kits or toy. The wall sections can be added to your own custom diorama base to really enhance the final scene. Each Tile is 45mm x 82mm in size and 5mm deep, and has been cast in high quality white or grey resin. Will require painting.
    Add to basket