Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Hyperspace Modulator Control is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of thirteen randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included) or by a USB-C cable (also not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 4 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the x6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 13x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 13x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.