My Cart (0 )
diorama (214)
-
Full Scale Wall mounted Control Panel from Star Wars: Rogue One
£135.00 – £220.00This full-scale prop has been styled from the Star Wars: Rogue One movie and is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. We have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of 10 randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included) or by a USB-C cable (also not included). The Control Panel can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Unit yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 10x pre-wired and resistored LEDs; x10 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 10x Acrylic colored panels, x1 resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Cobblestone Street
£23.95Add this fantastic resin cobblestone base to your model diorama. The flooring panel will fit any Rebel Alliance crew with a number of equipment or boxes, or any other figure you may have and will need painting. Approximately 240mm x 190mm in size, it has been cast in high quality white resin.Add to basket -
Kitbash Pipework Set C (20 pipes)
£29.95Get yourself this pack of 20 general pipes and conduit would be great for kitbashing any Star Wars or SciFi diorama scale. Most of the various pipes in this pack come in both left- and right-hand versions for that additional touch! All can be added to your own custom diorama base to really enhance the final scene and used as conduit or general pipework mounted on the wall. Each pipe is printed in high quality ABS-like grey resin. Will require painting.Add to basket -
Kitbash Pipework Set B (16 pipes)
£28.95Get yourself this pack of 16 general pipes and conduit that will be great for kitbashing any Star Wars or SciFi diorama scale. Most of the various pipes in this pack come in both left- and right-hand versions and some have control panels for that additional touch! All can be added to your own custom diorama base to really enhance the final scene and used as conduit or general pipework mounted on the wall. Each pipe is printed in high quality ABS-like grey resin. Will require painting.Add to basket -
Kitbash Pipework Set A (30 pipes)
£31.95Get yourself this pack of 30 general pipes that will be great for kitbashing any Star Wars or SciFi diorama scale. Most of the various pipes in this pack come in both left- and right-hand versions that can be added to your own custom diorama base to really enhance the final scene and used as conduit or general pipework mounted on the wall. Each pipe is printed in high quality ABS-like grey resin. Will require painting.Add to basket -
KX Droid Backpack & Stun Baton
£25.95Add to basketDesigned for your KX Droid figure, the Backpack and Stun Baton has been lovingly created by Janne Mällinen, and is printed from high quality ABS-like resin. KX-series security droids - also known as KX-series enforcer droids or KX enforcer droids - are a model of security droid manufactured by Arakyd Industries that was in service to the Galactic Empire during the Galactic Civil War. The droids have been designed with exaggerated human proportions but with the mobility of a human athlete. They are able to operate a variety or tools or equipment and weapons and can carry gear without becoming exhausted, such as a blaster. The items will need painting. -
Barricade Wall from Jedi Survivor game
£15.95 – £75.95A single section of the Barricade as seen in the Star Wars game - Jedi Survivor. You will receive 2 wall panels and a base section that make up a section of trench wall. You can order multiple sections to make a longer wall if you wish. Lovingly re-created, they have been scaled for Star Wars Legion game or your standard 18th (3.75") scale or 12th (6") Bandai or Hoy Toys figures, and make a great addition to your latest diorama scene. Each section has been cast in high quality white or grey resin. Will require assembly and painting. Once assembled, a single section of barricade will stand approximately:Select options- 215mm tall by 150mm wide by 14mm deep (18th scale)
- 315mm tall by 220mm wide by 20mm deep (12th scale)
-
Jedi Survivor Barrel Set
£18.95 – £25.95Select optionsCrafted by Janne Mällinen, this set of 4 barrels has been lovingly recreated from the Jedi Survivor game and is printed from high quality ABS-like resin. It will need painting. -
Moisture Vaporator from Mandalorian
£29.95 – £35.95Select optionsCrafted by Janne Mällinen, this Vaporator has been lovingly recreated from an episode of Mandalorian on Disney+ and is printed from high quality ABS-like resin. Comes in several parts and it will need assembling & painting. At 12th scale, the Vaporator stands 40cm tall (16") by 6cm by 6cm -
Jedi Survivor Vaporator
£21.95 – £25.95Select optionsCrafted by Janne Mällinen, this Vaporator has been lovingly recreated from the Jedi Survivor game and is printed from high quality ABS-like resin. Comes in 4 parts and it will need assembling & painting. -
Full Scale Prop Control Console from Galaxy’s Edge
£135.00 – £220.00This full-scale prop from Star Wars is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. Seen in Batuu, Galaxy's Edge in Disneyland we have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included). The Control Console can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Console yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, x1 large round resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Jedi Survivor Barrel C
£4.95 – £5.95Select optionsCrafted by Janne Mällinen, this barrel has been lovingly recreated from the Jedi Survivor game and is printed from high quality ABS-like resin. It will need painting. -
Jedi Survivor Barrel B
£5.95 – £7.95Select optionsCrafted by Janne Mällinen, this barrel has been lovingly recreated from the Jedi Survivor game and is printed from high quality ABS-like resin. Comes in 2 pieces, it will need painting. -
ANH Cantina Bar Drinks Island
£47.95 – £70.95Based on the Star Wars: A New Hope movie, this Cantina Bar Drinks Island has been created for your own diorama scene using quality 3D printed and lasercut parts. It complements the ANH Cantina Bar from Redflare Models and is suitable for 6" (12th scale) or 3.75" (18th scale) toy figures by Hasbro. It measures 14cm (L) x 22cm (W) x9cm (H) when constructed at 18th scale. The top section is made from 3mm thick frosted acrylic and is supplied with the resin curved front and the drink frame that has been printed in 3D resin. The lasercut parts all are easily assembled and glued in place using hot glue or wood glue. The frame is suitable for the Redflare Drink Dispensers (3 included). Will require assembly and painting.Select options -
Jedi Survivor Barrels A (2-pack)
£7.95 – £9.95Select optionsCrafted by Janne Mällinen, these 2 barrels have been lovingly recreated from the Jedi Survivor game and are printed from high quality ABS-like resin. They will need painting. -
HK-87 Staff
£3.95 – £4.95Select optionsDesigned for your Bandai or Hot Toys figure, the HK87 Staff is suitable for your Jedi in training. Created by Janne Mällinen, it has been printed from high quality ABS-like resin, the spear will need painting. -
Full Scale Prop Anode Processor Panel from Galaxy’s Edge
£175.00 – £285.00Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Anode Processor Unit is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 2 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the 6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Amnesty Housing Door Control unit
£150.00 – £230.00As seen in the Mandalorian TV show Episode 3, Series 3 - this full-scale prop of the Amnesty Housing Door Lock is wall-mounted, and measures approximately 21cm (L) x 11cm (W) x 4.5cm (D) in size. It has been reproduced as closely as possible to the one in the show, and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of seven randomly flashing and pulsing lights that are powered by a 9V Battery (not included). The Door Lock can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a mounting hole for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the 9V battery for when the battery needs to be changed. KIT FORM: If you prefer to assemble the Amnesty Housing Door Lock yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 7x pre-wired and resistored LEDs; x7 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x 9V Battery box; 7x Acrylic colored panels, x2 resin parts, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Bench Seat
£9.95 – £16.95This is a reproduction of the bench seat as seen in the Mos Eisley Cantina bar with Luke and Han Solo. Available in different scales and 2 widths to use as a valuable addition to your scale model kits or toy diorama. Printed in high quality ABS-like grey resin. Will require painting. 12th scale = 100mm (L) x 96mm (W) x 99mm (H) or 65mm (L) x 96mm (W) x 99mm (H) 18th Scale = 67mm (L) x 64mm (W) x 66mm (H) or 45mm (L) x 96mm (W) x 99mm (H)Select options -
Round Cantina Table
£7.95 – £15.95This is a reproduction of the round table seen in the Mos Eisley Cantina bar with Luke and Han Solo. Available in different scales to use as a valuable addition to your scale model kits or toy diorama. Printed in high quality ABS-like grey resin. Will require painting.Select options- 12th scale table top 62mm diameter, 62mm tall
- 18th scale table top 42mm diameter, 42mm tall
-
Amnesty Housing Door Control Panel
£2.95 – £5.95This detailed Door Panel is reproduced from the Series 3 Episode 3 of Mandalorian TV show showing the Amnesty Housing door control. The panel is available in 3 different sizes for your model diorama.Select options- 12th scale - 25mm x 13mm
- 6th scale - 50mm x 26mm
- 18th scale - 16mm x 9mm
-
ANH Cantina Bar
£88.95 – £95.95Famous for the scene in Star Wars: A New Hope, this Cantina Bar has been created for your own diorama scene using quality lasercut parts. Suitable for either 3.75" (18th) or 6" (12th scale) toy figures by Hasbro, this horseshoe design allows a number of options for your next diorama where you can create any favorite cantina scene from Star Wars you feel like creating! 12th scale version measures 40cm (L) x 22cm (W) x 9cm (H) when constructed. The top section is made from 3mm thick frosted acrylic that can diffuse a number of LEDs lights (not included) underneath giving it a glowing effect. A 1mm brass sheet wraps around the front, and the lasercut parts all are easily assembled and glued in place using hot glue or wood glue. Will require assembly and painting.Select options -
Star Wars Font Waterslide Decals
£11.95 – £15.95A5 sheet of professional waterslide decals (148mm x 210mm) with different Star Wars font sizes in black and red or White only. Simple application for your model or figure – cut using a sharp blade and soak in water for about 30sec before applying to your model.Select options -
Beskar Spear
£3.95 – £8.95Select optionsDesigned for your Bandai or Hot Toys figure, the Beskar Spear was wielded by the Mandalorian Din Djarin. Originally it was wielded by the Magistrate Morgan Elsbeth on Corvus during the New Republic Era. The staff is made of pure Beskar - a metal alloy tied with Mandalorian culture. After Elsbeth was defeated by the Force-sensitive Ahsoka Tano, the staff was given to the Mandalorian Din Djarin. The staff is durable enough to be able to block and deflect lightsaber blows and survived the destruction of the Razor Crest. After the Razor Crest's destruction, Din Djarin wielded it during the second rescue of Grogu, where he used it to destroy one dark trooper and engage Moff Gideon in lightsaber combat, which led to Gideon's defeat and capture. When Djarin was reunited with the surviving members of the Tribe on Glavis Ringworld, the Armorer informed him that beskar was only for armor, not weapons, as the spear was capable of piercing Mandalorian armor. Djarin had her melt the spear and reforge it into a garment for the foundling Grogu. Printed from high quality ABS-like resin, the spear will need painting. 6th scale version comes in 2 parts. -
Max Rebo & Piano STL
£15.95STL Files of Max Rebo and his Jett Organ. Max Rebo is a male Ortolan and a popular Jizz-wailer musician who leads the Max Rebo Band. He mainly plays the red ball jett organ, which he plays with his feet; he and his band often performed for criminals and gangsters. Max Rebo was born on the cold planet of Orto. At some point Rebo formed a band, called the Max Rebo Band, which would go on to perform Jizz-style music for crime lord Jabba the Hutt. Rebo also had a brother named Azool Phantelle. At some point, Azool swindled several of the inhabitants of the spaceport Mos Eisley on the planet Tatooine. The victims mistook Rebo for Azool and began chasing the musician.Add to basket -
Galoomp – 3 poses STL
£5.95STL Files of the Galoomp beast in 3 different poses. Named for the unique sound they made when foraging for food at dawn or dusk, Galoomps are large herbivores that are found on Naboo and Tatooine. Galoomps are, despite a reptilian appearance, are actually mammals and their nostril slits protected them against sand. Their tail knob, filled with loose pieces of cartilage, is shaken to warn of approaching danger. Once per year, a Galoomp would shed the bony rattle on its tail – the rattle was used to make toys for Gungan children.Add to basket -
-
Cantina / Marketplace Table STL
£5.95STL File of a table for a Cantina or marketplace. Comes in 2 parts.Add to basket -
Naboo Royal Crest Decals
£10.95Set of Waterslide Decals for 1:12, 1:18 or 1:6 scale Star Wars figures and model kits based on the Naboo Royal Crest symbol. Apply using water or decal solution and seal onto the model surface. Decals range in size from 5mm to 18mm.Add to basket -
Canto Bight Window frame
£28.95This large lozenge window frame that has been reproduced from Episode VII - The Last Jedi movie and is based those seen in the casino town of Canto Bight. It comes in 8 lasercut sections from 2mm plywood and 3mm high grade MDF with an additional clear panel for the window. Approximately 230mm x 110mm wide. It will require some assembly using wood glue. Can be painted.Add to basket -
Andor Windowframe – Circular
£20.95This circular window frame that has been reproduced from the Andor TV Show and comes in 4 sections. Precision lasercut from 2mm plywood or high grade MDF with a clear panel for the window, it will require some assembly. Can be painted.Add to basket -
Andor Windowframe – Maarva’s House
£25.95Create your own Maarva's house from Ferrix using this window frame that has been reproduced from the Andor TV Show. Precision lasercut from 2mm plywood or high grade MDF with a clear panel for the window, it requires assembly. Can be painted.Add to basket -
9 Technical Control Panels
£20.95 – £42.95A collection of 9 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)Select options -
Cantina Drinking Glasses
£9.95 – £20.95A collection of 7 drinking glasses and cups in either 6th scale (12"), 18th scale (3.75") or 12th scale (6") for your cantina diorama! There are a number of different shapes and designs for each glass or cup and they are suitable for Hasbro vintage or Black Series toys as well as Bandai figures. Printed in ABS-like Grey resin. Will require painting.Select options -
DLT-19x Targeting Blaster
£9.95 – £11.95Select optionsDesigned for your Bandai or Hot Toys figure, the DLT-19x targeting blaster is a variation of the DLT-19 heavy blaster rifle. Unlike the DLT-19, the DLT-19x releases all of its power in one shot before it needs to cool down. The DLT-19x is an incredibly powerful weapon, and can take down most enemies in one shot. The weapon has a scope which could be zoomed in farther than most scopes. This targeting blaster is very silent and effective, and as such, is a weapon of choice for many snipers, and the primary weapon for some Imperial sharpshooters. The LOM-series bounty hunter 4-LOM also wields a DLT-19x, as does agent Del Meeko of the Inferno Squad, who used it during the Battle of Endor. Specially created by Janne Mällinen, it has been printed from high quality ABS-like resin. The blaster will need painting. -
Drum Blaster
£9.95 – £11.95Select optionsThe Drum Blaster is a model of blaster that was used by Carasynthia Dune after she received it from Din Djarin. Specially created by Janne Mällinen, it has been printed from high quality ABS-like resin. The blaster will need painting. -
DLT-19 Heavy Blaster Rifle
£9.95 – £11.95Select optionsThe DLT-19 heavy blaster rifle is a model of heavy blaster rifle manufactured by BlasTech Industries. They are used by regular stormtroopers and Heavy Weapons Stormtroopers of the Galactic Empire, as well as by the bounty hunter Dengar, and Heavy Soldiers of the Alliance to Restore the Republic. It features a high rate of fire and deals heavy damage at long ranges, and is most commonly used for pinning down troops and eliminating large groups of enemies. Specially created by Janne Mällinen, it has been printed from high quality ABS-like resin. The blaster will need painting. -
20 Technical Control Panels
£26.95 – £55.95A set of 20 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)Select options -
Gonk BBQ
£26.95 – £30.95A perfect accompaniment to your Mos Eisley diorama scene, the GONK BBQ with fried Kreetle created a great centrepiece for your street scene. The BBQ comes in 9 parts and will need assembly and painting. The BBQ handle turns and you can even add lighting to the BBQ unit to add effects to the coals. Printed in ABS-like grey, the BBQ comes with a clear resin panel that can be lit.Select options -
V4-LO Light Droid
£18.95 – £24.95V4-LO is a GNK-series light droid who has been specially created by Janne Mällinen. The droid comes with an optional set of feet. Printed in ABS-like grey, the GNK droid will require assembly and painting.Select options -
EG-6 Gonk Power Droid
£18.95 – £24.95This EG-6 Gonk is a power droid specially created by Janne Mällinen. Printed in ABS-like grey, the droid comes in 3 parts and will require assembly and painting.Select options- 12th scale = approx. 90mm tall
- 18th scale = approx. 59mm tall
-
Kreetle Bug
£15.95 – £21.95A parasitic, burrowing arthropod native to Tatooine, a Kreetle is often found in cities, homes, and other urban areas. Equipped with five pairs of legs, a tough reddish-brown exoskeleton, and large mandibles they give birth to their young in the form of maggot-like larvae. Kreetles thrive on garbage and vegetable remains, and can often be found in abandoned profogg burrows. Kreetles feed on flesh, whether living or dead. They attack in groups of 4 to 5, taking a bite and then retreating before moving in for another attack. These creatures share a symbiotic relationship with slaatik hagworms in the Lianorm Swamp. The word "kreetle" was sometimes used as an insult. Printed in ABS-like high quality resin, it will require painting.Select options -
Payphone from Andor
£10.95 – £28.95Created by Janne Mällinen, for both 12th scale and 18th scale figures, this reproduction Payphone from the Andor TV show, and makes a perfect accompaniment to your new Andor street diorama. It has been designed to be mounted on a wall. Printed in ABS-like grey resin, it will require painting.Select options- 6th scale - 80mm tall x 50mm wide
- 12th scale - 40mm tall x 25mm wide
- 18th scale - 27mm tall x 17mm wide
-
Worrt
£10.95 – £25.95Worrts are a non-sentient species that hail from the desert of the planet Tatooine. These squat, large-mouthed creatures catch prey by sitting stationary in the sand and then using their purple prehensile tongues to wrap around passing rodents, insects or birds. They have brown, warty skin and a Worrt's head features a pair of sensitive cranial palps, two bulbous eyes, two nostrils, and a large mouth. The mouth contains a purple prehensile tongue, and strong teeth laced with a venom potent enough to kill a Bantha! When hungry, a Worrt settles into the sand, becoming indistinguishable from a rocky outcropping, and waits for prey to pass by. When its victim comes close enough, the predator throws its purple prehensile tongue out of its mouth and wraps it around the prey. The Worrt's prehensile tongue then snaps back, throwing the food down its throat, devouring it whole and belching loud. A Worrt is held in a tank at Oga's Cantina in Batuu's Black Spire, where it laid fresh eggs every day that were used as an ingredient in drinks, Printed in ABS-like high quality resin, it will require painting.Select options -
Imperial Console with Decals
£33.95 – £40.95Created by Enis Hazan, this Imperial Console unit is available in either 1:12 (6") or 1:18 (3.75") scale and comes with a set of waterslide decals for the screens. The unit is printed in high quality 3D ABS-like resin and will require painting.Select options- 12th scale - 73mm (L) x 57mm (W) x 106mm (H)
- 18th scale - 48mm (L) x 38mm (W) x 71mm (H)
-
Frog Lady’s Egg Tank
£47.95Frog Lady was on Tatooine in Chalmun's Spaceport Cantina when the Mandalorian Din Djarin entered the cantina in search of work. She enlisted the help of the Mandalorian Djarin to escort her. Djarin helped but asked for information regarding other Mandalorians seen on Trask. During their journey, Frog Lady slept in the cockpit, unaware that Grogu took an interest in her eggs and ate some of them! After crashing on Maldo Kreis, Frog Lady and Djarin clashed regarding what to do next, in part due to their language barrier. Frog Lady seemed able to speak only her native tongue, and unable to speak Basic. However, Frog Lady did prove to be technically adept, however, as she was able to repair the remnants of Q9-0 well enough to use his vocabulator as a translation device, enabling her to persuade Din Djarin to keep his word. This faithful reproduction of her spawn tank comes with a clear tube, an acrylic clear dome and is printed from ABS-like resin and requires assembly & painting. "These eggs are the last brood of my life cycle. My husband has risked his life to carve out an existence for us on the only planet that is hospitable to our species. We fought too hard and suffered too much to resign ourselves to the extinction of our family line. I must demand that you hold true to the deal that you agreed to." ―Frog Lady, to the Mandalorian.Select options- Tube is 50mm in diameter and 50mm tall at 6th scale and the tank is approximately 110mm x 70mm x 70mm in size once assembled
- Tube is 32mm in diameter and 33mm tall at 12th scale
-
Luleo Primoc and Suspension Tank
£42.95 – £90.95Luleo Primoc is a musician who performs on the First Light ship owned by Crimson Dawn. The tiny Gallusian is a chart-topping singer with hits such as "Your Love is Gravy" and "Carve Your Name in My Heart" and in the years before the Clone Wars was also known for starring in a series of holomovies whilst wearing a dashing humanoid exo-suit. When performing aboard the First Light, he sings from inside a repulsorlift-fitted flask filled with formaldehyde and is paired with bestselling recording artist Aurodia Ventafoli. Although past his prime, Primoc is still favored by retro-collectors and enthusiasts and at one point, Primoc also recorded his own version of the classic Huttese holiday jingle "Joh Blastoh". Printed from high quality ABS-like grey resin, the model comes in 7 parts with a clear acrylic tube 50mm tall, a clear acrylic rod and stand and will need assembly and painting.Select options -
9 Detention Block Flooring Tiles
£14.95A collection of 9 custom flooring tiles for a Star Wars detention center diorama approved by the Empire in 1:12 scale to use as a valuable addition to your scale model kits or toy. The flooring panels can be added to your own custom diorama base to really enhance the final scene. Each Tile 1:12th scale is 50mm x 50mm in size and has been printed in high quality ABS-like grey or black resin. Will require painting.Select options -
Wall-mounted Air Cooling Unit
£33.95 – £40.95This wall-mounted Air Cooling Unit is perfect for your 12th (6") or 18th scale (3.75") Mos Eisley diorama and will help cool the occupants of the buildings from the Tatooine twin suns! Created by Hammerfall Customs, it has been printed from high quality ABS-like resin, the Air Cooling Unit comes in a single part and will need painting.Select options- 12th scale = 150mm (H) x 80mm (W) x 45mm (D)
- 18th scale = 101mm (H) x 53mm (W) x 31mm (D)
-
Wall-mounted Resonator Unit
£19.95 – £24.95This wall-mounted resonator unit is styled from one seen at Batuu in Disneyland, Florida and will be perfect for your 12th (6") or 18th scale (3.75") Mos Eisley diorama. Created by Hammerfall Customs, it has been prrinted from high quality ABS-like resin, the model comes in 3 parts and will need assembly and painting.Select options -
Grid of Imperial Floor Panels for IKEA Unit
£32.95 – £38.95A single base board that has been lasercut from black acrylic with a grid of Imperial flooring panels for a Star Wars diorama approved by Darth Vader himself to use as a valuable addition to your scale model kits or toy. The flooring panel has been specially created to fit into the bottom of an IKEA unit to really enhance your toy figure display. Depending on the dimensions of the IKEA unit, there are either 5x5 panels or 4x5 panels on a single base sheet.Select options -
Canister Unit for Transport from Battlefront II
£12.95 – £23.95For your new Star Wars diorama, this reproduction canister transport unit in either 1:12 (6") or 1:18 (3.75") scale from Battlefront II has 4 main cylinders and 3 smaller cylinders in a single, portable block. The unit is printed in high quality 3D ABS-like resin and will require painting.Select options- 12th scale - 57mm (L) x 43mm (W) x 47mm (H)
- 18th scale - 38mm (L) x 29mm (W) x 31mm (H)