My Cart (0 )
control panels (34)
-
Full Scale Wall mounted Control Panel from Star Wars: Rogue One
£135.00 – £220.00This full-scale prop has been styled from the Star Wars: Rogue One movie and is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. We have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of 10 randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included) or by a USB-C cable (also not included). The Control Panel can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Unit yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 10x pre-wired and resistored LEDs; x10 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 10x Acrylic colored panels, x1 resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Control Console from Galaxy’s Edge
£135.00 – £220.00This full-scale prop from Star Wars is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. Seen in Batuu, Galaxy's Edge in Disneyland we have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included). The Control Console can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Console yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, x1 large round resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Anode Processor Panel from Galaxy’s Edge
£175.00 – £285.00Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Anode Processor Unit is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 2 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the 6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Amnesty Housing Door Control unit
£150.00 – £230.00As seen in the Mandalorian TV show Episode 3, Series 3 - this full-scale prop of the Amnesty Housing Door Lock is wall-mounted, and measures approximately 21cm (L) x 11cm (W) x 4.5cm (D) in size. It has been reproduced as closely as possible to the one in the show, and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of seven randomly flashing and pulsing lights that are powered by a 9V Battery (not included). The Door Lock can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a mounting hole for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the 9V battery for when the battery needs to be changed. KIT FORM: If you prefer to assemble the Amnesty Housing Door Lock yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 7x pre-wired and resistored LEDs; x7 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x 9V Battery box; 7x Acrylic colored panels, x2 resin parts, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Amnesty Housing Door Control Panel
£2.95 – £5.95This detailed Door Panel is reproduced from the Series 3 Episode 3 of Mandalorian TV show showing the Amnesty Housing door control. The panel is available in 3 different sizes for your model diorama.Select options- 12th scale - 25mm x 13mm
- 6th scale - 50mm x 26mm
- 18th scale - 16mm x 9mm
-
Sale!
9 Technical Control Panels
£13.95 – £42.95A collection of 9 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)Select options -
Sale!
20 Technical Control Panels
£22.95 – £55.95A set of 20 technical control panels, electrical panels and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting or you can have our team paint them for you. (NB: Picture shows painted version for illustrative purposes only. Finish and color scheme may differ)Select options -
Street Communicator
£17.95 – £62.95This detailed street communication terminal console is suitable for 6th, 12th scale and 18th scale figures. At 12th scale, the console stands 120mm tall and makes a perfect accompaniment to your Mos Eilsey street scene diorama. Created by Enis Hazan, it has been printed in ABS-like grey resin. The terminal comes in one section and will require painting. Supplied with a small set of Decals.Select options- 6th scale - 240mm tall
- 12th scale - 120mm tall
- 18th scale - 81mm tall
-
Hoth Rebel Tactical Console
£57.95Add to your next Hoth Echo Rebel Base diorama this 12th scale (6") Rebel Tactical Console with large screen created by Janne Mällinen. The main screen can be lit from inside the console using small LEDs to make the screen glow. Console comes in 9 parts and will require assembly & painting. Printed in ABS-like grey resin with a lasercut clear screen. . Screen is 130mm wide by 80mm. The console dimensions are 160mm (L) x 140mm (H) x 40mm (W).Add to basket -
Security Holo Pedestal with Hologram
£28.95 – £35.95This Imperial holo pedestal with a large hologram is a perfect fit for your new Star Destroyer diorama. The pedestal has been created by Janne Mällinen and can be lit from inside the console using a small LED to make the screen glow. The Holo pedestal unit comes in 4 parts and will require assembly & painting. Printed in ABS-like grey resin with a frosted top screen and a large hologram figure or either Lord Vader, Emperor Palpatine or Master Yoda.Select options- 85mm (H) x 70mm (L) x 63mm (W) at 12th scale
-
Glowing Sign (Large) with LED panel
£15.95 – £31.95Ideal for your next Star Wars diorama, this Glowing building signage can be fitted with a LED Micropanel so that the sign is lit from within. The frame comes in two halves, and the LED panel fits inside, and once assembled can be mounted onto the wall of your diorama for atmospheric effects. 2 small pegs connect it to the wall of your building or diorama.Select options- Approximately 125mm x 65mm x 30mm
- Can be supplied with or without the LED Micropanel & resistor
- Optional signs have been printed in high quality decal paper
- Printed in grey ABS-like resin
- Will require painting
-
Vaporator Monitoring Station
£14.95 – £55.95This detailed Vaporator monitoring station is perfectly suitable for both 12th scale (6") and 18th scale figures (3.75") but we also sell a 6th scale version for your bigger dioramas! A wall-mounted unit, it makes a perfect accompaniment to your Tatooine diorama. Printed in ABS-like grey resin, the station comes with decals. Will require assembly and painting.Select options -
Bay 94 Sign – 3-pack
£8.95A pack of 3 set of Bay 94 signage wall plaques for your next Millennium Falcon Star Wars diorama. Straight from Tatooine, you get three panels of different sizes can be wall mounted. Comes with a slight surface texture to simulate stonework.Add to basket- 65mm (W) by 56.5mm (W) by 4mm (D)
- 43mm (W) by 37.5mm (W) by 2.7mm (D)
- 30mm (W) by 26mm (W) by 2mm (D)
-
Death Star Elevator Door Set
£29.95 – £35.95This elevator door and surround section from the Death Star or Imperial Star Destroyer can be combined with the other Wall Section Sets to create a length of Imperial corridor. The Elevator is styled after the McQuarrie designs and can be added to your own custom diorama base to really enhance the final scene. The Door Section has been scaled for 12th toy or model figures (6") and is made up of 4 elements.Select options- The Elevator Door is approximately 148mm wide x 180mm tall x 74mm deep at 6" scale
- The Elevator Door is approximately 100mm wide x 124mm tall x 50mm deep at 3.75" scale
- Available with or without the half curved pipe section for the door
- Can be lit using LEDs in the top section
-
Shield Control Terminal
£15.95 – £33.95This detailed Rebel Base shield monitoring console suitable for both Star Wars Legion, 12th scale and 18th scale figures. At 12th scale, the console stands 171mm tall and makes a perfect accompaniment to your Rebel base diorama. Printed in ABS-like grey resin, the terminal comes in 2 sections and a decal. Will require assembly and painting.Select options- 12th scale - 171mm tall
- 18th scale - 114mm tall
- Star Wars Legion - 57mm tall (no decal)
-
Rebel Communication Terminal
£22.95 – £60.95This detailed Rebel Base hyperspace communication terminal console is suitable for 6th, 12th scale and 18th scale figures. At 12th scale, the console stands 126mm tall and makes a perfect accompaniment to your Rebel base diorama. Printed in ABS-like grey resin, the terminal comes in 2 sections and will require assembly and painting.Select options- 6th scale - 254mm tall
- 12th scale - 126mm tall
- 18th scale - 84mm tall
-
Rebel Computer wall-mounted Terminal
£22.95 – £70.95This detailed Rebel Base terminal console is suitable for both 12th scale and 18th scale figures. At 12th scale the console stands 126mm tall and makes a perfect accompaniment to your Rebel base diorama. It has been designed to be placed against a wall. Printed in ABS-like grey resin, the terminal comes in 2 sections and a small decal for the front of the console. It will require assembly and painting.Select options- 12th scale - 126mm tall
- 18th scale - 84mm tall
-
Death Star Wall Panel Door Section
£18.95This detailed Death Star Door opening set can be combined with the Wall Section Sets to create a number of Imperial Death Star walls - all approved by Darth Vader himself. The Door Section can be added to your own custom diorama base to really enhance the final scene. The Door Section has been scaled to fit either an 18th or 12th toy or model figure and is made up of 4 elements in each Panel Set. The Door Section is approximately 140mm x 180mm in size but there are 2 different height sections for scaling as you require. Cast in high quality white or grey resin the Door Section will require assembly and painting.Add to basket -
Death Star Wall Panel Sets
£19.95 – £55.95These detailed wall panel sets can be combined to create a number of Imperial Death Star wall panels and are approved by Darth Vader himself. The panel sets can be added to your own custom diorama base to really enhance the final scene. The Panel Sets have been scaled to fit either an 18th or 12th toy or model figure. There are approximately 25 elements in each Panel Set. Each Panel Section covers approximately 180mm x 180mm surface area, and has been cast in high quality white or grey resin. Will require assembly and painting.Select options -
Holotable and 3 Holograms
£21.95 – £27.95This highly-accurate holotable comes in 2 parts, and is sized for any 12th scale figures. It has been specially created by Janne Mällinen and has been hollowed to allow for a LED or tealight to be added to the interior, to light the hologram. The slot in the console is for the datacard that comes with a Hot Toys Rebel Trooper. Printed from high quality ABS-like resin, the model will need assembling & painting. Comes with a set of 3 holograms in transparent blue resin (Yoda, Darth Vader & Emperor Palpatine).Select options -
Sale!
Mandalorian Prison Ship Door
£11.95 – £17.95Modelled after the Mandalorian TV Show episode 6 - 'The Prisoner' this detailed circular door can be use as a valuable addition to your next Mandalorian diorama! It features details including the 3 main openings and bars, control locks and a panel for adding lights or decals. The door was seen on the Rebel Alliance prison ship and measures 125mm in diameter and is approximately 7mm thick. ORDER 2 or more and get 10% off Cast in high quality white or grey resin. Will require painting.Select options -
Light Sconces 8-Pack
£4.95This pack of 8 light sconces can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. There are two different designs in the pack (4 of each) and measure approximately 30mm x 9mm. Each panel has been printed in ABS-like grey resin. Will require painting.Add to basket -
SciFi Circular Portal Hatch
£8.95 – £9.95A brilliant addition to your next diorama - the Circular Portal Hatch has a high level of detail for your scale model kits dio. As seen at Batuu, Galaxy's Edge in Disneyland, this portal can either be wall or floor mounted. Comes with a surface texture to simulate rust and is approximately 60mm diameter by 10mm high at 12th scale. Printed in high quality grey ABS-like resin. Will require painting.Select options -
Sci-fi Light Fixture – Twin Pack
£2.95 – £12.95A 2-pack set of wall-mounted light fixtures as a valuable addition to your scale model kits or toy Star Wars diorama. As seen at Batuu, Galaxy's Edge in Disneyland, you get two lighting fittings that can be wall mounted - and even drilled and lit - to really enhance your personal diorama scene. Comes with a slight surface texture to simulate rust and is approximately 28mm (W) by 18mm (W) by 15mm (D) at 12th scale. Each light has been printed in high quality grey ABS-like resin. Will require painting.Select options -
SciFi Anode Processor
£10.95 – £20.95To add to your next diorama scene, the Anode Processor has been reproduced from accurate photos and is highly detailed. Printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Anode Processor Unit is typically wall-mounted, and measures approximately 60mm (L) x 40mm (D) x 25mm (H) at 12th scale, and will require painting.Select options -
SciFi Twin Displacement Compressor Panels
£9.95 – £11.95To add to your next diorama scene, these twin Displacement Compressor Units are a set of highly detailed wall panels, and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Twin Compressor Units measures approximately 50mm (L) x 28mm (D) x 10mm (H) at 12th scale, and will require painting.Select options -
SciFi Capacitance Generator
£8.95To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures approximately 50mm (L) x 35mm (D) x 10mm (H) at 12th scale, and will require painting.Select options -
SciFi Condenser Unit
£12.95 – £29.95To add to your next diorama scene, this Condenser Unit is a highly detailed wall unit and printed in ABS-like resin. Seen at Batuu - Galaxy's Edge in Disneyland - The Condenser Unit measures 60mm (L) x 40mm (D) x 15mm (H) at 12th scale, and will require painting.Select options -
Death Star Control Panel 3-Pack
£4.95 – £5.95This 3-pack custom wall control panels as seen on the Death Star in numerous Star Wars movies. The control panels can be added to your own custom diorama base to really enhance the final scene and have been lovingly reproduced to be as screen accurate as possible. Panels are 15mm by 10mm. Each panel has been cast in high quality white or grey resin. Will require painting.Select options -
Sale!
Galaxy Edge Wall Panels – Pack 3
£15.95A collection of 10 custom wall units and control interface panel tiles as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. There are a number of wall units together with a keypad and wall power generator. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or control interfaces mounted on the wall. Each part has been printed in ABS-like grey resin. Will require painting.Add to basket- 3 wall-mounted control computers
- 1 Keypad
- 2 Comms units
- 1 wall power generator
- 2 miscellaneous panels
- 1 panel with a power switch
-
Sale!
Galaxy Edge Wall Panels – Pack 2
£10.95A collection of 9 custom wall units and control interface panel tiles as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. There are a number of wall units together with 2 keypads and wall lights. The various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.Add to basket- 3 Wall Lights
- 2 Keypads
- 3 Main Block power units / panels
- 1 miscellaneous greeblie
-
Sale!
Galaxy Edge Wall Panels – Pack 1
£8.95A collection of 7 custom wall panels and units as seen at the Galaxy Edge Land in Florida based on the universe of Star Wars. Often known as greeblies, the various panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each Tile has been printed in ABS-like grey resin. Will require painting.Add to basket -
Sale!
7 SciFi Control Boxes and Vent Panels
£6.95A collection of 7 custom control panels, vents and general equipment greeblies for any Star Wars or SciFi diorama scale. The various control panels can be added to your own custom diorama base to really enhance the final scene and used as conduit or electrical boxes mounted on the wall. Each panel has been cast in high quality white or grey resin. Will require painting.Add to basket -
Sale!
Star Wars Control panels
£8.95 – £12.95These 4 highly detailed wall panels can be a valuable addition to your own scale model kits or toy diorama and are fantastic when added to wall sections. Each panel comes in one part, and has been cast in high quality white or grey resin. Will require painting. There are 4 panels in the pack:Select options- Large Panel with 3 hexagons - 45mm x 54mm @ 12th scale
- Small Panel with 3 hexagons - 33mm x 40mm
- Square Door Plate - 25mm x 25mm
- Droid Control Panel - 25mm x 37mm