My Cart (0 )
Full Scale Props (5)
-
Full Scale Prop Control Console from Galaxy’s Edge
£135.00 – £220.00This full-scale prop from Star Wars is wall-mounted, and measures approximately 21cm (L) x 21cm (W) x 6cm (D) in size. Seen in Batuu, Galaxy's Edge in Disneyland we have tried to reproduce the design as close as possible, and it is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by x6 AA Batteries (not included). The Control Console can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a series of mounting holes for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the battery box for when the batteries needs to be changed. KIT FORM: If you prefer to assemble the Control Console yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, x1 large round resin part, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Anode Processor Panel from Galaxy’s Edge
£175.00 – £285.00Seen at Batuu - Galaxy's Edge in Disneyland - This full-scale prop of the Anode Processor Unit is wall-mounted, and measures approximately 45cm (L) x 33cm (W) x 6cm (D) in size. It has been reproduced from accurate photos and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of nine randomly flashing and pulsing lights that are powered by 6x AA Batteries (not included). The Unit can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has 2 mounting holes for hanging from 2 screws and can be mounted either vertically or horizontally. The rear of the unit also has the battery box with a panel to access the 6 AA batteries easily when they are needed to be changed. KIT FORM: If you prefer to assemble the Anode Processor yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 9x pre-wired and resistored LEDs; x9 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x AA Battery box; 9x Acrylic colored panels, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Full Scale Prop Amnesty Housing Door Control unit
£150.00 – £230.00As seen in the Mandalorian TV show Episode 3, Series 3 - this full-scale prop of the Amnesty Housing Door Lock is wall-mounted, and measures approximately 21cm (L) x 11cm (W) x 4.5cm (D) in size. It has been reproduced as closely as possible to the one in the show, and is highly detailed for mounting on your wall in a bedroom or office/den. The unit has a set of seven randomly flashing and pulsing lights that are powered by a 9V Battery (not included). The Door Lock can be ordered fully assembled and painted, or in kit form. All parts are included. Made from strong MDF, the unit should be mounted inside and is not suitable for exterior use. The rear of the unit has a mounting hole for hanging from a screw to your wall. The rear of the unit also has the battery box with a panel to access the 9V battery for when the battery needs to be changed. KIT FORM: If you prefer to assemble the Amnesty Housing Door Lock yourself, the kit contains all of the materials, parts and wiring needed. Package contains - 7x pre-wired and resistored LEDs; x7 LED holders; 1x GPFX Lighting Controller Board; 1x Switch; 1x 9V Battery box; 7x Acrylic colored panels, x2 resin parts, numerous MDF lasercut parts and instructions for assembly. The Lighting Controller Board has screw-fittings to allow simply attachment of the LEDs but some soldering may be needed for the switch.Select options -
Personalized metal Imperial Bounty Docket Card
£30.95Select optionsWANTED FOR CRIMES AGAINST THE IMPERIAL EMPIRE! This fully personalized Imperial Bounty Card is lasercut in metal and can be fully customized for your partner or friend. Ideal for a Star Wars fan on their birthday or for a Christmas gift - or just for that special occasion! The card measures 100mm by 50mm and is made from metal with a black coating on one face. NOTE: We require a photo or image of the subject such as a passport photo. Minimum size 800x800 px and ideally a PNG or JPG file. Please email this image and the full name of the recipient to our account so we can add this to the docket card. You can select from the following options to further customize the card.- Name of Person the card is for.
- Reward Value: 100 Credits, 200 Credits, 500 Credits, 1,000 Credits, 5,000 Credits, 10,000 Credits, 50,000 Credits, 100,000 Credits, 250,000 Credits, 500,000 Credits or 1m Credits
- Crime Committed: Nerf Herd Rustler on Tatooine, Tax Evasion, Imperial Sedition, Starship Theft, General Property Damage against the Empire, Hyperspace Violation, Violating Order 66 or a Jedi Sympathizer
-
Imperial Credits and assorted Currency chips
£10.95 – £99.95Select optionsIdeal for your next Sabacc game to win the Millenium Falcon. These solid metallic credits are created from resin and come in a wonderful money pouch to store them in from unwanted thieves next time you visit Mos Epsa or Canto Bight. They are perfect for your next cosplay event too. Each chip is cold-casted metallic resin and comes in different colors according to their value.- 1 Dezicred Coin (Crodium)
- 1 Credit (Durite)
- 50 Credits (Chromium)
- 100 Credits (Osmiridium)
- 10 Imperial Credits (Bronzium)
- 100 Imperial Credits (Neuranium)
- 500 Imperial Credits (Doonium)
- 1,000 Imperial Credits (Aurodium)
- Mandalorian Coin (25 Credits)
- Battuan Spira (5 Credits)